ZEN GUIDEBY OZARKGame guides

EA Sports FC · Cronus Zen

Ozark Ultimate Setup: EA Sports FC Controls

Set up Ozark Ultimate’s EA Sports FC controls on Cronus Zen. Match Classic or Alternate, configure skills and shot profiles, and check Player Lock.

Set up Ozark Ultimate Script

  1. Confirm the hardware and access. Follow the console and controller connection guide, then open My Ozark with your checkout email and customer key.
  2. Set up the right profile. Select the controller labels you use and match Classic or Alternate to your in-game layout. Choose one skill and one shot shortcut for the first test, so you can verify each input separately.
  3. Install and verify. Save the build, open Zen Flasher and write it to the intended slot. Check for a successful write and select that slot before testing in a practice mode where the game permits it.

What the mods do

Skills and favourites
Map right-stick directions or configure dedicated skill buttons. A move still depends on player ability and the situation in the game.
Shot profiles
Use separate bindings and power behavior for the two profiles. Check the profile’s shot type and whether it uses manual hold or a saved press duration.
Player Lock
The shortcut sends both stick clicks. Check the right-stick pause if teammate selection follows too quickly.
Steady Aim
This shapes small left-stick movement while shooting. Test with it temporarily off if manual aim feels different after installing the profile.

What to check first

If a skill produces the wrong move, check the control layout and player’s move eligibility. If two shortcuts conflict, test with one disabled and review their triggers.

If the app cannot find the Zen, use the USB and device detection checklist. If regular buttons do not respond, follow the controller connection checks.

Detailed mod instructions

Ozark documented these button combinations and settings for version 1.3. Check the installed build and use its release notes before applying the steps to another version.

Ultimate Script: setup and controls

1. Open Programmer, choose Ultimate and open Guided setup.
2. Choose your console. On PC, choose your connected Xbox or PlayStation controller. This sets the guide and the Zen OLED button labels.
3. Choose Game Layout in the generator to match your game: Classic shoots with B/Circle and crosses with X/Square; Alternate shoots with X/Square and crosses with B/Circle. Pass stays A/Cross and through ball stays Y/Triangle. Set the same layout in your game yourself. Turn Simplified Skill Moves off if you use skills.
4. Choose a shot for each shortcut and a move for each skill button. Choose Off for actions you do not want. Start with Hold for power: hold your shortcut, aim and release.
5. Open Your buttons and check every assignment. All script settings contains timings, bindings, right-stick skills, Player Lock, favourites and Steady Aim.
6. Save your build, continue to Flash, connect the Zen and install it in your chosen slot. Select that slot and test one action in practice.

Guided setup starts with right-stick shortcuts, Player Lock and Steady Aim off. A saved build is not installed until flashing finishes successfully. Use the next lessons for each feature. Software checks do not replace testing on your Zen and in-game.

Zen menu and controller buttons

1. Select the Zen slot containing Ultimate. L2 + Share on PlayStation or LT + View on Xbox turns Ultimate off or on.
2. Hold L2 + Options or LT + Menu to open settings. Up/Down chooses a group; Cross/A opens it.
3. Left/Right chooses a setting. Hold L2/LT and press Left/Right to change its value.
4. Press Circle/B to return to the group picker, then Circle/B again to save and exit. Turning Ultimate off while editing cancels without saving.
5. Close the menu, release all buttons and centre the sticks before testing an action.

Fresh script defaults use D-pad left/right for shots, D-pad down/up for button skills, L3/LS click as the right-stick modifier and R3/RS click for Player Lock. Saved builds can differ; follow Your buttons. Xbox cannot use Touchpad. All six action assignments must be distinct, including disabled actions. Paddles need a controller exposing separate paddle inputs. The screen blanks after inactivity; opening the menu or starting an action refreshes it.

Settings → Game Layout is the ninth Settings entry. Hold LT/L2 + Left/Right to choose Classic or Alternate. Press B/Circle twice to save and exit. Menu navigation stays A/B on Xbox or Cross/Circle on PlayStation in both layouts. Controller changes labels; Game Layout changes gameplay shoot/cross mapping. Changing layout cancels an active action; release shortcut buttons and centre RS before continuing. The script cannot change your game’s layout setting.

Shot profiles and recovery

1. In All script settings, open Shot profile 1 or 2. Choose Off, Finesse, Low Driven, LD Finesse or LD Trivela and its trigger button.
2. With Hold for power, hold the shortcut while aiming and release it to end the first press. Hold Limit caps a long hold at 1,200 ms by default. With Fixed power, one tap uses your saved duration.
3. Ultimate supplies the second press for low-driven types. Do not double-tap the shortcut yourself. Finesse uses a single press; its second-press fields are inactive.
4. Test your shot in practice. New setups use a 60 ms second-press delay and a 50 ms second press. Fixed durations start at 230 ms for profile 1 and 245 ms for profile 2. These are starting values; change one at a time.
5. Settings → Shot recovery controls the final release time: 40 ms initially, adjustable from 20 to 200 ms. Let the sequence finish. Release the selected Shoot button (B/Circle in Classic, X/Square in Alternate) before your next action to clear the extra-press guard.

Finesse sends R1/RB + shoot. Low Driven sends two shoot presses. LD Finesse adds R1/RB; LD Trivela adds L2/LT. Player abilities and game state determine the animation. There is no automatic ping measurement or guaranteed goal. Saved custom timings are preserved when upgrading; check the values in your own build.

The chosen physical profile triggers stay the same in both layouts. A custom B trigger still uses B even when Alternate sends X to shoot. A profile assigned to the normal Shoot button owns that button even while defending; keep D-pad triggers if you want normal shooting input available.

Steady Aim: optional shooting assist

1. Steady Aim starts Off. Enable it in Guided setup or All script settings → Steady Aim. On the Zen, open Settings → Precision.
2. Start with Light smoothing. Medium and Strong smooth small left-stick corrections more. You still choose the aiming direction.
3. Choose the scope: Profiles only (default) for scripted shot profiles, Shot button for normal shooting (B/Circle in Classic, X/Square in Alternate), or Both.
4. Compare the same shot with the assist off and on in practice. Keep a strength only if you prefer its response.

This smooths small stick changes. It does not detect targets, choose a goal corner, change shot power or guarantee accuracy. The game's Precision shot assistance is a separate option. Neutral input and large corrections pass through; smoothing pauses in menus, skills, Player Lock and incompatible action states. Strength and scope stay saved when the feature is off.

Skills, right-stick shortcuts and favourites

1. Choose any of the 74 supplied moves or Off for Button skill 1 and 2. Set the button, single/double tap and exit side. Double-tap window starts at 300 ms.
2. For right-stick skills, choose Disabled, Always On, Double Tap or Hold Modifier. Assign the up, right, down and left moves separately.
3. In Hold Modifier mode, hold its assigned button (fresh default L3/LS click) and flick the right stick. Move briefly in your intended direction first; the script cannot see your player's true facing.
4. Return the stick to centre before another flick. In Double Tap mode, double-tap the modifier to enable or disable RS skills; this mode starts off after loading or opening the menu.
5. Choose six different favourites. Skill Picker → Favourites limits the Zen's skill choices to these six plus Off. The website still offers all 74 moves, and changing favourites does not replace existing assignments.

Use the same Classic or Alternate layout in your game and your build, with Simplified Skill Moves off. Shoot/cross actions inside skill moves follow the selected layout; physical shortcut buttons keep their assignments. Your player must be able to perform the move. Only one action runs at a time; inputs during it are discarded instead of queued. A library name does not prove that a move works for a specific player or game situation.

Player Lock and teammate selection

1. Enable Player Lock in the game and in All script settings → Player lock.
2. Check the assigned trigger in Your buttons. The fresh script default is R3/RS click; press it once. Ultimate presses both stick clicks for 60 ms.
3. Use the right stick to choose your teammate. Player Lock RS pause suspends right-stick skill shortcuts for 500 ms by default; adjust it from 0 to 1,500 ms. Zero disables the pause.
4. Release the right-stick skill modifier before returning to skills.
5. Lock cooldown is separate from the RS pause. It defaults to 350 ms and prevents rapid repeat requests.

The shortcut cannot detect the game's lock state or select a teammate for you. Guided setups start with Player Lock off. Use your build's actual trigger, which may differ from the fresh default.

Update a saved build and troubleshoot

1. Open the saved Ultimate build in Programmer. Version 1.3 adds Game Layout while keeping existing custom timings and supported button assignments. Older builds start at Classic. Choose Alternate only if that is your layout in your game.
2. Review Your buttons and All saved settings. Xbox Touchpad assignments are replaced with a free button. Older duplicate favourites are made distinct. Steady Aim starts off when added to an older build.
3. Save a fresh build, then continue to Flash. Older compiled builds must be rebuilt for 1.3. Saving a browser draft alone does not update your Zen.
4. If an action fails, select the correct Zen slot, check Ultimate is ON and confirm your controller and matching Classic or Alternate layout in your game and your build. Close the menu, release controls and centre the sticks. Try one enabled action from Your buttons.
5. If flashing fails, copy the error details and open a ticket using Discord Support in My Ozark. Keep existing-slot protection enabled.

For a wrong move or shot, check the binding, selected type and your player's abilities. Test one change at a time. Compiler and simulation checks do not verify physical Zen input timing or in-game results.